|
water monitoring and controlling system
industrial design | water enregy system | 3D illustration
industrial design of a Unique generator that produces micro-energy from the flow of water inside distribution pipes. The development of water resistant electronics is a unique specialty. In this case, it is a special generator that produces micro-energy from the water in the pipe. The energy works to operate monitoring and control devices and remote transmission. This is another example of the success of a technology-oriented product design approach. Hydrospin's product converts AC power to DC, loads the internal battery and transfers an electric hydropower power produced from the kinetic energy of the water. Universally optimized with many devices. Can be installed anywhere. industrial design | water enregy product design | 3D imaging
One of the considerations in the choice of plastic materials in general, and especially when it comes to an environment with water, is the ability to withstand these conditions. Hygroscopic or moisture absorption from the environment.
There are materials that have a tendency to absorb water: At the top of the list, we found nylon Nylon, ABS, Acrylic, Polycarbonate, Polyurethane, PET, PBT and there are materials that won't absorbe water: Polyethylene, Polyystyrene, PVC, Polypropylene. In these materials, water remains only on the surface and easy to remove. industrial design | water enregy system | 3D model illustration
Model to illustrate the functioning of the system - the model was designed to present technology for exhibitions, conferences, presentation to buyers. It reveals the charm of the product. We perform a "transparent" simulation describing the operation of the product. The device receives AC power from its generator. The device uses advanced energy saving and self-sustaining algorithms to generate maximum energy. industrial design | water enregy system design | final product
The Mini Hydrospin Generator basically combines a mini generator and a turbine into one instrument. The combined generator and turbine unit is installed on a single axis, a practice that allows minimal initial loss and produces energy efficiency. The unit is designed not to leave parts moving out of the water. The generator and the turbine are fully immersed. The final product is displayed at the water exhibition. Polyethylene, Polypropylene, Polypropylene, PVC, Polypropylene will not be absorbed and found only on the surface. To design and develop a product such as this requires a lot of knowledge and experience. Quntz Product designers, international experts in the development of filters for the water industry. ‹›
|
|